Concept illustration of a two-car garage with a glossy slate-gray flake floor
Concept illustration of the same two-car garage with stained and cracked bare concrete

AI concept illustration — not an actual customer property

Residential & commercial epoxy coatings

Built to last,
designed to impress.

Flake, metallic, solid-color, and UV-stable polyaspartic coatings, plus concrete polishing. Mechanical diamond grinding on every job. Based in Burleson, TX.

Request a quote See the work

Concrete,
re-engineered.

Bare concrete takes on oil, dust, and cracks. A coating system is meant to seal the surface and make cleanup easier. In business since 2022.

Mechanical diamond grinding is part of every job, with crack and spall repair when the slab needs it. Moisture testing is done when needed.

  • 1–2 daysTypical garage install
  • 24 hrsWalk-on after
  • 72 hrsPark after

A typical garage installation takes about 1–2 days. Walk-on is often about 24 hours after the work, and parking about 72 hours after. Actual timing depends on the project, conditions, and the crew’s instructions.

Selected work

The same space.
A new feeling.

A before and after you can drag to compare, plus a collage of finished floors.

Finished gray flake epoxy floor in an empty garage
Bare, stained concrete floor in a garage before coating
01 Before and after Flake
Dark flake epoxy garage floor with hexagonal ceiling lights
Covered stone porch with a finished gray flake epoxy floor
Large shop with a gray flake epoxy floor and open bay doors at dusk
Finished flake epoxy floor in a room with a stone wall and glass doors
Empty garage with a finished gray flake epoxy floor
Patio with a finished flake epoxy floor beside a pool
Side patio with a finished flake epoxy floor along a house
Installer broadcasting flake onto a garage floor
Garage flake floor during installation, with a broom in the foreground
Lit garage with a finished flake epoxy floor, seen from the driveway at dusk

Drag to compare.

These two sliders are AI concept illustrations — not actual customer properties.

Concept illustration of an auto shop bay with a light-gray solid-color floor and yellow bay lines
Concept illustration of the same auto shop bay with worn concrete
02 Two-bay auto shop Solid color · Polyaspartic topcoat · Safety striping AI concept illustration — not an actual customer property
Concept illustration of a basement with a charcoal and steel-blue metallic floor
Concept illustration of the same basement with dusty cracked concrete
03 Walk-out basement Metallic · Charcoal / steel blue AI concept illustration — not an actual customer property

Systems

Pick the finish.
We handle the rest.

Coatings and concrete polishing. The right system depends on the slab, the space, and how you use it. Custom quotes only.

  1. 01

    Flake

    Full-broadcast vinyl flake over a pigmented base, locked under a clear polyaspartic topcoat. A common choice for garages. Top sellers are Graphite, Cobalt, and Tuscany.

    Garages · Laundry · Patios
  2. 02

    Metallic

    Hand-worked metallic pigments in a clear epoxy that move like poured stone. Every floor is one of one. Best indoors and out of direct sun.

    Basements · Showrooms · Living areas
  3. 03

    Solid color & polyaspartic

    Clean single-color systems with a UV-stable polyaspartic topcoat and optional non-slip aggregate. Shop bay lines can be discussed for the space.

    Shops · Warehouses · Kitchens
  4. 04

    Concrete polishing

    Polished concrete for spaces that want the slab itself as the finish. Diamond grinding is still part of the prep.

    Interior concrete
  5. 05

    Repair & prep

    Diamond grinding on every job, crack and spall repair, and old-coating removal when the slab needs it. Moisture testing is done when needed.

    Any concrete

Flake colors

DENIM
DENIM
ARTIC
ARTIC
GRANOLA S6
GRANOLA S6
CHARCOAL S2
CHARCOAL S2
TUSCANY S8
TUSCANY S8Top seller
GRAPHITE S7
GRAPHITE S7Top seller
FOSSIL S5
FOSSIL S5
COBALT S3
COBALT S3Top seller
SAHARA S7
SAHARA S7
BASALT M4
BASALT M4

Colors on screen are approximate — ask to see a physical sample.

How we work

Good floors start below the surface.

  1. 1

    Assess

    Moisture testing when needed, plus a look at cracks and the existing surface. You get a custom quote for the system that fits. No minimum job size.

  2. 2

    Grind & repair

    Mechanical diamond grinding on every job opens the concrete so the coating can bond. Cracks, spalls, and control joints are filled and ground flush when the slab needs it.

  3. 3

    Build the system

    Basecoat, then a full-broadcast flake, metallic, solid color, or concrete polishing. A UV-stable polyaspartic topcoat goes on coating systems.

  4. 4

    Return to use

    Foot traffic is often possible about 24 hours after the work, and parking vehicles about 72 hours after. That is separate from the 1–2 day installation. Actual timing depends on the project, conditions, and the crew’s instructions.

Concept illustration of an installer spreading a slate-gray base coat while flakes are broadcast
Concept image of a base coat and flake broadcast. AI concept illustration — not an actual customer property.

Customers

Reviews

A few comments from customers, in their own words.

  • GenZEpoxy were extremely professional, always on time and stayed true to their quote. He did an amazing job on our 3 car garage. The epoxy floor showcases our car beautifully. Thank you VERY much!! I definitely recommend their work.

    Michelle S.Facebook recommendation · Sep 10

  • I'm really glad I chose GenZ Epoxy for my shop floor. The quality of their work is top-notch, and they completed the project on time without any hassle. The final result is both stylish and durable. Definitely worth every penny!

    Brett S.Facebook recommendation · Mar 23

  • Couldn't be happier with our new floors! GenZ Epoxy made the whole process easy and enjoyable. They were super knowledgeable, friendly, and paid attention to every detail. The finish looks AweMazing !!! And it's clear they care about quality. Very Highly recommend!

    Kari W.Facebook recommendation · Nov 12, 2024

  • Highly recommend this company, they did a thorough job all throughout the process. My garage floor looks amazing!! 😁👍👍 Thanks yall💯

    Rick V.Facebook recommendation · Feb 5, 2023

  • They did an amazing job on our garage floor. Highly recommend them.

    Brandi V.Facebook recommendation · Feb 5, 2023

  • Thank you GenZ Epoxy!! We love the finished product!! Our garage and porch look amazing! The team was excellent and professional...and they had so many color pallet options!! check them out if your looking to upgrade that concrete!

    Brandon M.Yelp · 5 stars

Start your project

Let's transform your space.

Call during open hours, or send a request and we’ll follow up.

817-925-8395

Based in Burleson, TX · Serving DFW and surrounding areas · up to about 200 miles · Mon–Sat 7am–6pm

We come to you. No minimum job size. A travel fee may apply outside the main area. Custom quotes only. Cash, check, card, Zelle, and Venmo. A typical garage installation takes about 1–2 days.

Finish type

This request is emailed to GENZ Epoxy and stored so they can follow up. Call 817-925-8395 if you would rather not use the form.